Installation guide

PCI-SB StarFabric PCI Interface Card Installation Guide B-3
Hardware, Physical, & Environmental
Physical
Table 7 describes physical specifications for PCI-SB card.
Environmental
Table 8 describes environmental specifications for the PCI-SB card.
The SG2010 requires +3.3V for core power at the chip level. Some older
computer systems cannot supply +3.3V. Make sure your computer sup-
ports this voltage requirement before installing the PCI-SB card.
TABLE 7. Physical
Specification Description
Bus Interface PCI 2.2
Dimensions 75mm x 150mm x 8.2mm
Weight 6 oz.
Interface cable Two or four Category 5 shielded
cables with RJ-45 connectors
Power Supply 3.3 vDC required, SV tolerant
Power Consumption 2 Watts maximum
TABLE 8. Environmental
Specification Range
Operating Temperatures +10 to +50C
Storage Temperature -20 to +60C
Relative Humidity 5% to 95%, non-condensing
MTBF (Mean Time Between
Failure)
50,000 hours