Installation guide

PCI-SB StarFabric PCI Interface Card Installation Guide 3-23
Steps to Install the PCI-SB Card
For Windows...
1. From the Start menu, select Settings -> Control Panel -> System or right-click
on the My Computer icon and select Properties.
2. Click on the Device Manager tab.
3. Select View by Connection to display a list of components configured on your
system.
A list of devices appears, as shown in Figure 35.
FIGURE 35. Device Manager List of PCI Host Interface Links
4. Check the list for the PCI-SB card and expansion cards.
If you don’t see your PCI-SB card in the list, refer to Chapter 4, “Troubleshoot-
ing.”
Any additional expansion cards
on the secondary bus should also
appear here.
Linked Devices
appear here