Installation guide

PCI-SB StarFabric PCI Interface Card Installation Guide 3-7

Steps to Install the PCI-SB Card

Table 4 shows the configurable settings for DIP switches on the PCI-SB card.

To use the PCI-SB card as a Gateway, set the DIP switches to Disable

Bridge. Gateway functionality requires additional software development

using StarGen’s Fabric Primitives Library. Refer to StarGen user docu-

mentation for more details.

TABLE 4. DIP Switch Settings

Slot Number Down/Off Up/On

1 Set to Root mode Set to Leaf mode

2 Enables Bridge Disables Bridge

Test mode

* For factory-use only by Aurora Technologies personnel.

Test mode