Installation guide

PCI-SB StarFabric PCI Interface Card Installation Guide 3-5

Steps to Install the PCI-SB Card

Complete the following procedures to install the PCI-SB card in a PCI slot in a

device.

1. Configure PCI-SB Card DIP switches for Root or Leaf operation.

2. Shut down the local device and remote devices.

3. Insert the card in a PCI slot in a device.

4. Connect the CAT5 shielded cabling.

5. Perform power-up sequence for remote devices and local device.

6. Install hardware drivers.

7. Verify operation and connectivity.

Refer to the following sections for step-by-step details on these procedures.