Installation guide

No part of this publication may be copied, photocopied, reproduced,

stored in a retrieval system, translated, transmitted, or transcribed in any form

or by any means manual, electric, electronic, electro-magnetic, mechanical,

optical, or otherwise, in whole or in part without prior written consent from

Aurora Technologies, Inc.

Limitation of Liability

Aurora Technologies, Inc. makes NO WARRANTY, EXPRESSED or IMPLIED,

with respect to this manual, and any related items, its quality, performance,

merchantability, or fitness for any particular use. It is solely the purchaser’s re-

sponsibility to determine its suitability for any particular use. Information

contained in this document is subject to change without notice.

Trademark Credits

The following are trademarks of Aurora Technologies:

PCI-SB StarFabric PCI Interface Card

XP-SG Series

All other registered trademarks and salesmarks are the proprietary property

of their respective owners.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment gen-

erates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference

in which case the user will be required to correct the interference at his

own expense.