Installation guide

About the PCI-SB StarFabric® PCI Interface Card
2-8 PCI-SB StarFabric PCI Interface Card Installation Guide
Table 3 shows the operational states for the PCI-SB card’s LEDs.
Status Indicator Light
A Status Indicator light alerts you if the card malfunctions at power-up. When the
PCI-SB card powers up, the status light should turn on briefly before shutting off. If
the light remains on, there is a problem with the card.
Cabling
Standard CAT5 shielded cables support distances up to five meters (about 15 feet)
for room scale topologies and eliminate the need for expensive proprietary cables.
TABLE 3. LEDs Operational States
If LED is: This means...
On (Green)
LVDS pair is synchronized with traffic enabled
Flashing
LVDS pair is synchronized but traffic is disabled
Off
LVDS pair is not synchronized and traffic is disabled