User guide

11
User Guide
Save Presets
1. Press the SAVE button in the PRESETS menu on the front panel and the LED will turn
on.
2. Select the preset profile number and save the current mapping profile to the memory.
3. Press the S AVE button to execute the setting. After loading procedure, the LED will turn
off.
Preview presets
1. Press the PREVIEW button on the front panel.
2. Press the LOAD button.
3. Select the preset profile number to load the corresponding mapping and press the
respective button.
4. Press the LOAD button or PREVIEW button to escape PREVIEW presets state
Step 1 & 3
Step 2
Step 1 & 4
Step 3
Step 2 & 4