User guide

2
User Guide
INTRODUCTION
About
The DXE-CAT-S2 is part of the growing Digital Xtreme Series. This product is different than the
typical CAT extender found on the market today as it not only breaks the price barrier but the
feature and usability aspects as well. All connectors are on one side to make wiring cleaner and
rack mounting easier. Having the ability to power the device with the choice of transmit or receive
reduces the installation time and keeps things neat. An industry first is Aurora’s exclusive
Flex-Power
TM
Power-Over-Ethernet circuit (Patents Pending), which allows both the transmitter
and receiver to be powered without the need of any wall supplies.
Being able to go the distance is important too, and HDBaseT technology helps achieve that. With
a single CAT cable, the DXE-CAT can go up to 330ft 1080p 60Hz 48bit color depth, 500ft 1080p
60Hz 24bit (CAT 6), or 600ft 1080p 60Hz 24bit (CAT 6A Shielded) depending on model. In
addition, the RS-232, IR, & LAN can be sent over the same cable bi-directionally.
Features
 Transmit HDMI up to 1080p 60Hz 48bit 330ft over one CAT 5e/6/7 cable
 Transmit HDMI up to 1080p 60Hz 24bit 500ft over one CAT 6 cable
 Transmit HDMI up to 1080p 60Hz 24bit 600ft over one CAT 6A Shielded cable
 Supports 4K x 2K & HDMI 3D
 HDCP Compliant
 All connectors on one side for easier installation
 Bi-directional RS-232 & IR & LAN
 Power both units from TX or RX side with wall power supply (HDBaseT POE)
 LAN POE (Power-Over-Ethernet) can power both TX & RX without wall supplies (Patents
Pending)
 Status LED for all connections on front
 Various mounting options
Warning: Do not plug RJ-45 HDBaseT output to non-HDBaseT complaint devices or damage may occur to
either product.