USERS GUIDE DXE-CAT-S1 HDMI HDBaseT CAT Extender 70m (230ft) i Manual Number: 140604
User Guide SAFETY INSTRUCTIONS Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions. The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product that may be sufficient to constitute a risk of electric shock to anyone opening the case.
User Guide TABLE OF CONTENTS PACKAGE CONTENTS .............................................................................................................1 INTRODUCTION ........................................................................................................................2 About ..................................................................................................................................................... 2 Features ....................................................
User Guide PACKAGE CONTENTS Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged. DXE-CAT-RX1 x 1 DXE-CAT-TX1 x 1 DXE-CAT-E1 Wall / Desk Mount Ears with Screws x 4 PS0053-1 24V DC Power Adapter x 1 Optional Accessories IR Receiver CA0026-1 IR Emitter CA0012-1 IR Blaster CA0049-1 RS-232 Adaptor (3.5mm TRS to FEMALE DB9 2-TX 3-RX) CA0052-F2T3R RS-232 Adaptor (3.
User Guide INTRODUCTION About The DXE-CAT-S1 is part of the growing Digital Xtreme Series. This product is different than the typical CAT extender found on the market today as it not only breaks the price barrier but the feature and usability aspects as well. All connectors are on one side to make wiring cleaner and rack mounting easier. Having the ability to power the device with the choice of transmit or receive reduces the installation time and keeps things neat.
User Guide Front & Rear Panel DXE-CAT-TX1 Front LED Indicators IR Out – Blinks when emitting IR to device from IR Port. It is normal to be lit if nothing is plug into IR port. IR In – Blinks when receiving IR from IR port. It is normal to be lit if nothing is plug into IR port. TX – RS-232 Transmit. Blinking rate and intensity will vary with baud rate. RX – RS-232 Receive. Blinking rate and intensity will vary with baud rate.
User Guide Front & Rear Panel DXE-CAT-RX1 Front LED Indicators IR Out – Blinks when emitting IR to device from IR Port. It is normal to be lit if nothing is plug into IR port. IR In – Blinks when receiving IR from IR port. It is normal to be lit if nothing is plug into IR port. TX – RS-232 Transmit. Blinking rate and intensity will vary with baud rate. RX – RS-232 Receive. Blinking rate and intensity will vary with baud rate.
User Guide IR EXTENDERS IR Blaster IR Receiver IR Connections The DXE-CAT Series has the ability to auto detect on the IR port if a receiver or a blaster / emitter is connected. IR Blaster / Emitter: Plug in an IR blaster to emit all IR command signals received from the IR receiver to control the associated devices with built-in IR sensor IR Receiver: Plug in an IR receiver to receive all IR command signals from the IR remote controls of the associated devices.
User Guide CONNECTOR PIN DEFINITION HDMI Pin 1 TMDS Data2+ Pin 8 TMDS Data0 Shield Pin 15 SCL Pin 2 TMDS Data2 Shield Pin 9 TMDS Data0– Pin 16 SDA Pin 3 TMDS Data2– Pin 10 TMDS Clock+ Pin 17 DDC/CEC Ground Pin 4 TMDS Data1+ Pin 11 TMDS Clock Shield Pin 18 +5 V Power Pin 5 TMDS Data1 Shield Pin 12 TMDS Clock– Pin 19 Hot Plug Detect Pin 6 TMDS Data1– Pin 13 CEC Pin 7 TMDS Data0+ Pin 14 Reserved (N.C.
User Guide APPENDIX 1 Troubleshooting Problem 1. No Video Signal. 2. LED is not lit 3. IR not working 4. DXE-CAT-RX is very warm 5. Intermittent Noise in image Solution a. Check that the power plug is properly inserted into a functioning power outlet. b. Make certain source is on. c. Verify pin-out of connector at each end. a. Check 24v power supply is plugged in. b. Check to see if Wall supply is plugged into wall outlet. c. Make certain wall outlet has power. a.
User Guide APPENDIX 2 Model Name Technical Technical Specifications DXE-CAT DXE-CAT-S1 230ft 70m – 1080p 60Hz 36bit CAT 6a/7 230ft 70m – 1080p 60Hz 24bit CAT 5e/6/6a/7 197ft 60m – 1080p 36bit CAT 5e/6 131ft 40m – 1080p 60Hz 48bit CAT 6a/7 115ft 35m – 1080p 60Hz 48bit CAT 5e/6 Distance CAT 5e/6 will achieve 197ft 60m for pixel clock <=225MHz CAT 5e/6 will achieve 115ft 35m for pixel clock >225MHz CAT 6a/7 will achieve 230ft 70m for pixel clock <=225MHz CAT 6a/7 will achieve 131ft 40m for pixel clock >225
User Guide APPENDIX 3 Cabling Aurora extender products have been tested utilizing shielded cabling. Although our products will work fine without shielded cable it is highly recommended for environmental reasons as the signals are high frequency and can radiate as well as be susceptible to external frequencies and possibly cause noise or disruption in the image. Unshielded cabling will work fine in a conduits as it will provide the shielding.
User Guide APPENDIX 4 Warranty Limited 3 Year Warranty Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2009 and after. Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are covered for a period of 1 year.
www.auroramultimedia.com User Guide This product warranty extends to the original purchaser only and will be null and void upon any assignment or Aurora Multimedia Corp.
