User guide

3
User Guide
INTRODUCTION
About
Aurora's 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O
cards offering 1080P 60Hz transmission over CAT cable up to 600ft. All units with auto EDID
learning and management for ease of setup. Associated HDBaseT Tx and Rx modules are
remotely powered by the DXM units over CAT cable. The new units also offer flexible RS232
signal routing to individual outputs or to all outputs simultaneously for unprecedented display
control. With a full assortment of Input cards no format is left behind with crystal clear digital
conversion to 1920 x 1080 60Hz.
Features
 Card Cage Sizes of 8x8, 16x16, 32x32
 Configurable as 4-channels per Card
 12.8Mbps Bandwidth per Port
 Hot Pluggable Input and Output Cards
 Redundant Power Supply for 16x16 and 32x32
 EDID Management
 HDCP Compliant
 VGA Input / Output Cards
 3G/HD/SD SDI Input / Output Cards
 HDMI Input / Output Cards (Output Cards w/Audio De-embedding & Auto DVI Detect)
 HDBaseT CAT Input / Output Cards (Powers remote Tx/Rx units & bi-directional
RS-232)
 Fiber Input / Output Cards up to 6600 feet (2000m)
 YPbPr Input Cards
 Composite Input Cards
 Presets
 Front LCD status
 Front Panel Button Control
 RS-232 Control
 Ethernet Control