User guide

11
User Guide
Switching with Front Panel
Note: Please use the following sequence for proper results.
1) Connect the source(s) output to the input(s) of the appropriate card
2) Connect the output(s) of this appropriate card to the destination(s) (ex. Display) input
3) Connect power cable and switch unit on. The indicator light will then light as well as the
front LCD.
4) Finally, turn on the resource and display devices.
5) Use front panel to select the I/O port.
• Press the number key for required input channel
• Press the “Switch”
• Press the number key for required output channel
• Press the “END”
• Press the “ENTER” at last
Example: Input 2 to Output 5 - 2→
Swi tc h →5→END→ENTER”