User guide

8
User Guide
Rear Panel DXM G2 Series
IEC Power
Connector(s)
110 / 220 power connector. DXM-1616 / DXM-3232 have 2 for redundant
power. The lower power connector is the primary when a single supply is
installed.
Fan Card
The card with the silver handle is for the fans.
Input Cards
The model will
determine the amount of input cards. There are 4 ports per
input card. The 8x8 has 2, 16x16 has 4, and the 32 x 32 has 8. Note the
silk screen in the corner to match the cards in the correct slot type. Cards
are hot swappable.
Output Cards
The model will determine the amount of output cards. There are 4 ports
per output card. The 8x8 has 2, 16x16 has 4, and the 32 x 32 has 8. Note
the silk screen in the corner to match the cards in the correct slot type.
Cards are hot swappable.
LAN
Future Use. At this time if LAN operation is required it is recommend to use
the Nugget Serial on the RS-232 port.
RS-232
Main Control Port. Refer to the Serial Command section for available
commands. Recommended baud rate is 115k 8N1
DXM-1616-G2
DXM-3232-G2
DXM-88-G2