USERS GUIDE DXM G2 Series Digital Xtreme Card Cages 8x8, 16x16, 32x32 i Manual Number: 130708 Firmware v2.1.
User Guide SAFETY INSTRUCTIONS Please review the following safety precautions. If this is the first time using this model, then read this manual before installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for further instructions. The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product that may be sufficient to constitute a risk of electric shock to anyone opening the case.
User Guide TABLE OF CONTENTS PACKAGE CONTENTS .............................................................................................................2 INTRODUCTION........................................................................................................................3 About ..................................................................................................................................................... 3 Features .....................................................
User Guide PACKAGE CONTENTS Please make sure the following items are included within your package. Contact your dealer if any items are missing or damaged.
User Guide INTRODUCTION About Aurora's 2nd generation Digital Xtreme Matrix (DXM) switchers now with HDBaseT CAT I/O cards offering 1080P 60Hz transmission over CAT cable up to 600ft. All units with auto EDID learning and management for ease of setup. Associated HDBaseT Tx and Rx modules are remotely powered by the DXM units over CAT cable. The new units also offer flexible RS232 signal routing to individual outputs or to all outputs simultaneously for unprecedented display control.
User Guide MATRIX FRAMES, CARDS, & ACCESSORIES DIGITAL XTREME (GEN 2) – FRAMES & CARDS Matrix Card Frames DXM-88-G2 8x8 Digital Xtreme Matrix Card Cage DXM-1616-G2 16x16 Digital Xtreme Matrix Card Cage DXM-3232-G2 32x32 Digital Xtreme Matrix Card Cage Input Cards DXCI-4-HDMI-G2 4 Input HDMI Card DXCI-4-HDBT1-G2 4 Input HDMI HDBaseT 230' CAT Card DXCI-4-HDBT2-G2 4 Input HDMI HDBaseT 330'/600' CAT Card DXCI-4-DVI-G2 4 Input DVI HDCP & Auto Eq for 30m Cable Support Card DXCI-4-FIBR3-G2 4 Input
User Guide DXCI-4-HDMI-G2 DXCI-4-HDBT1-G2 / DXCI-4-HDBT1-G2 DXCI-4-VGA-G2 DXCI-4-2V2H-G2 DXCO-4-HDMI-G2 DXCO-4-HDBT1-G2 / DXCO-4-HDBT-2-G2 5
User Guide DIGITAL XTREME ACCESSORIES External HDBT / Fiber Boxes and Wall Plates DXE-CAT-RX1 230' HDBaseT Receiver (No PS) DXE-CAT-RX2 330'/600' HDBaseT Receiver (No PS) DXE-CAT-TX1 230' HDBaseT Transmitter (No PS) DXE-CAT-TX2 330'/600' HDBaseT Transmitter (No PS) DXW-2 2 Input HDBaseT Wall Plate (VGA & HDMI) - 230' CAT Extender DXE-FIBR-TX3 HDMI to Dual Multi-mode (300m) / Single-mode (2km) Fiber Transmitter DXE-FIBR-RX3 Dual Multi-mode (300m) / Single-mode (2km) Rack Mounts / Power Supplie
User Guide DESCRIPTION Front Panel DXM G2 Series LCD Backlit display for the status and operation 0-9 Input / Output port selection number keys. Switch The HDMI signal toggle selection key. Example: 3→ Switch→6→END→ENTER to switch signal from the input 3 to output 6. Space key which is used to switch to many output ports at once. ＆ All Example: 1→Switch→2→＆→3→＆→6→END→ENTER to switch signal from the input 1 to outputs 2, 3, 6 at the same time.
User Guide Rear Panel DXM G2 Series DXM-88-G2 DXM-3232-G2 DXM-1616-G2 IEC Power Connector(s) 110 / 220 power connector. DXM-1616 / DXM-3232 have 2 for redundant power. The lower power connector is the primary when a single supply is installed. Fan Card The card with the silver handle is for the fans. Input Cards The model will determine the amount of input cards. There are 4 ports per input card. The 8x8 has 2, 16x16 has 4, and the 32 x 32 has 8.
User Guide OPERATION Front Panel Menu Settings Main Menu: 1. EDID Setting 2. RS232 Setting 3. Language 4. Beep Setting 5. Keypad Light 6. LCD Backlight 7. System Reset 8. Back Sub Menu: EDID Setting 1. EDID Update 1/ External EDID 2/ Default EDID 3/ Back 2. EDID Manage 1/ Save EDID 2/ Delete EDID 3/ Back 3. EDID Info 4. Back RS232 Setting 1. Main PCB 1/ Baud Rate 2/ Data bits 3/ Stop bit 4/ Parity 5/ Back 2. Input 1-16 3. Output 1-16 4.
User Guide Language 1. English 2. Back Beep Setting 1. Turn on 2. Turn off 3. Back Keypad Light 1. Turn on 2. Turn off 3. Back LCD Backlight 1. Always on 2. 20 minutes 3. 15 minutes 4. 10 minutes 5. 5 minutes 6.
User Guide Switching with Front Panel Note: Please use the following sequence for proper results. 1) Connect the source(s) output to the input(s) of the appropriate card 2) Connect the output(s) of this appropriate card to the destination(s) (ex. Display) input 3) Connect power cable and switch unit on. The indicator light will then light as well as the front LCD. 4) Finally, turn on the resource and display devices. 5) Use front panel to select the I/O port.
User Guide Examples of operation Example: To switch signal from the input 1 to Output 3 and 4 at the same time. 1. press the input “1” 2. press the “switch” 3. press the output”3” 4. press the “＆” 5. press the output “4” 6. press the “end” 7.
User Guide EDID Management 1) - Copy EDID from an output to one or multiple inputs: Menu EDID Settings EDID Update External EDID. Command format: [Output#] Switch [Input#] End Enter Example: 2 Switch 1 End Enter: copy EDID from output 2 to input 1. 2 Switch 1&2&3 End Enter: copy EDID from output 2 to inputs 1, 2 and 3.
User Guide CARD FUNCTIONALITY HDBaseT Cards HDBaseT input and output cards are designed to receive or transmit audio, video, control, and power up to 600ft with 24bit 1080p 60Hz depending on model using a single common CAT 5e / 6 / 6A cable. DXCI-4-HDBT1 & DXCO-4-HDBT1 will go up to 230ft with 36bit color depth. DXCI-4-HDBT2 & DXCO-4-HDBT2 will go up to 330ft 48 bit color depth or 600ft with 24bit color depth (CAT 6A shielded cable required for this distance).
User Guide HDMI Cards HDMI input and output cards support 1080p 60Hz video resolutions with stereo and Dolby® Surround Sound audio. The input and output cards will work with DVI signals. The output card has the unique ability to auto detect a DVI display or device connected and automatically remove the audio from the signal even if the source is HDMI. This saves space and cost as an external device to strip the audio electrically is not required.
User Guide SERIAL COMMANDS RS-232 Commands NOTES: ! IS A COMMAND (Case sensitive) ? IS A QUERY COMMAND (Case sensitive) ~ IS A RESPONSE (All responses are in the same case as the command) “” Represents a carriage return (Hexadecimal character 0x0D or Decimal 13‟) Timing between commands – Wait at least 250ms between commands (version 2.1.
User Guide Serial Transmit Input Command !RSINxTXnns x = port number(s) = 1-32 1-32 1-32 etc. More than one port # use space between nn = byte count for string = 00 - 99 Number must be double digit and in ASCII. Single digits must have zero in front s = string is in ascii and can have non-printable ascii characters as well. Refer to the control system manual how to send hexadecimal inside a string. Note the hexadecimal counts as only 1 byte for the byte count.
User Guide ports) Query Firmware Input Card Query Firmware Output Port (only for RS-232 ports) Query Firmware Output Card Query Firmware Main Processor Query Input Route ?FMINCx x = port number = 1-8 ?FMOUTPx x = port number = 1-32 cards. ?FMOUTCx x = port number = 1-8 ?FM0 Zero is default for main processor firmware query ?Rx x = port number = 1-32 Note if input is routed to more than one output then multiple port numbers will be listed in response separated by a space.
User Guide RS-232 Command Usage Example Route Input 5 to Output 1, 2, 3, and 4 Example String !R5to1,2,3,4 Example Response ~R5to1,2,3,4 Trigger Preset 2 Save current configuration into Preset 5 !P2 !S5 ~P2 ~S5 Set Input Port 1 Baud Rate to 96008N1 !BR96008N1IN1 ~BR96008N1IN1 Set Output Ports 1, 3, 5, and 13 Baud Rate to 192008N1 !BR192008N1OUT1 3 5 13 ~BR192008N1OUT1 3 5 13 Turn off input ports 11 & 15 auto receive !RXOFFIN11 15 ~RXOFFIN11 15
User Guide Query Input Port 1, 3, & 5 Serial Receive ?RXIN1 3 5 ~RXIN1ON ~RXIN3ON ~RXIN5OFF Query Output Port 1 Serial Receive ?RXOUT1 ~RXOUT1ON Query Input Port 1 Firmware ?FMINP1 ~FMIN1-2.0.0 Query Input Card 1 Firmware Query Output Port 1 Firmware ?FMINPC1 ?FMOUTP1 ~FMINC1-2.0.0 ~FMOUT1-2.0.0 Query Output Card 1 Firmware Query Main Processor firmware Query Input 13 Route.
User Guide CONNECTOR PIN DEFINITION RS-232 Serial Port Baud Rate: Selectable by front panel. NO.
User Guide CAT5e/6/7 22
User Guide APPENDIX 1 Troubleshooting For best results always make certain you have the latest firmware. Problem 1. No Video Signal. 2. LED is not lit 3. No Dolby® Surround Sound 4. LEDs on HDBaseT cards alternating 5. RS-232 commands not working Solution a. Check that the power plug is properly inserted into a functioning power outlet. b. Make certain source is on. c. Verify pin-out of connector at each end. d. If used in electrical noisy environment shielded CAT cable may be required. e.
User Guide APPENDIX 2 Firmware Update DXM Update Utility & Hardware DXM Update Software requires the DXM-PGM1 device. Refer to the DXM-PGM1 manual for more information.
User Guide APPENDIX 3 Technical Specifications Model Name Technical RS-232 Baud Rate LAN Speed LAN Connectors RS-232 Connector Power Connector Mechanical Housing DXM Series Card Cage Max 115kbps 1 - 10/100 8P8C RJ-45 DB-9 Female IEC Black Aluminum enclosure 3 RU – DXM-88 7 RU – DXM-1616 8 RU – DXM-3232 19” Rack Mounting 110/220 Dimensions Mounting Power supply Operation temperature 0~40°C [32~104°F] Storage temperature Relative humidity -20~60°C [-4~140°F] 20~90% RH [no condensation] Specifications
User Guide APPENDIX 4 Warranty Limited 3 Year Warranty Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. This Limited Warranty covers products purchased in the year of 2009 and after. Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are covered for a period of 1 year.
User Guide 27
www.auroramultimedia.com User Guide This product warranty extends to the original purchaser only and will be null and void upon any assignment or Aurora Multimedia Corp.
