User manual

~ 15 ~
RS-232 Communication settings & protocol:
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity: none
Command
Types
Command
Codes
Functions
System Command
/*Type; Request model’s information
/%Lock; Lock the keyboard of control panel on the Matrix.
/%Unlock; Unlock the keyboard of control panel on the Matrix
/^Version; Request firmware version
/:MessageOff; Turn off feedback. It will only show “Switcher OK”
/:MessageOn; Turn on feedback
EDIDMOn. Manually adjust the EDID with the most priority output
port.
EDIDMInit. Recover the factory default EDID data
Undo. Cancel previous operation
Demo. Switch to “demo” mode, 1->1, 2->2, 3->3 …
[x1]All. Transfers all signals from input channel [x1] to all output
channels
All#. Transfers all input signals to the corresponding output
channels respectively.
All$. Switches off all output channels.
[x1]#. Transfers signals from input channel [x1] to output
channel [x1].
[x1]$. Switches off output channel [x1].
Operation Command
[x1] V[x2]. Transfers video signals from input channel [x1] to output
channel [x2].
[x1]
V[x2],[x3],[x4].
Transfers video signals from input channel [x1] to output
channels [x2], [x3] and [x4].
[x1] A[x2]. Transfers audio signals from the input channel [x1] to the
output channel [x2].
[x1]
A[x2],[x3],[x4].
Transfer the audio signals from the input channel [x1] to
the output channels [x2], [x3] and [x4].
[x1] B[x2]. Transfers both video and audio signals from input
channel [x1] to output channel [x2].
[x1]
B[x2],[x3],[x4].
Transfer both video and audio signals from input channel
[x1] to output channels [x2], [x3] and [x4].
Status[x1]. Request input channel for output channel [x1].
Status. Request input channel for output channels one by one.
Communication Protocol