Installation Guide

There are seven steps to installing a faucet:
INSTALLATION OF BASIN FAUCET
1.First,prepare the installation tool. Check whether the parte are complete before installation.Common faucet parts
include:hose,rubber ring,etc.In addition,waterproof tape should be prepared.
2.Check if the main valve of water supply is closed.
3.Use a waterproof tape to wrap a few turns in the clockwise direction on the thread of the faucet. (This is very
important. The direction of the waterproof tape must be tangled clockwise.lf twint revrsely, it will leak,which means
that the direction of the waterproof tape winding is opposite to the direction of he faucet thread).
4.Install the faucet following the graphic instruction below.
5.Open the main valve of the water supply,normal water can be used.
6. The thread size is 9/16,it's meets the installation needs of most American house.
7.Button is functional when water pressure is applied.
INSTALLATION STEPS
1. Insert 1 faucet into the panel.
Serial Number
1
2
3
4
5
Quantity
1
1
1
1
2
Part Name
Faucet
Rubber gasket
Gasket
Lock nut with
water inlet hoses
PACKING LIST
5
4
3
2
2. 2 Rubber gasket, 3 Gasket,
4 lock nut back onto the faucet in the sequence
show on the drawing above.