I NSTALLATI ONMANUAL
Rainfall Shower System Pressure Balance Valve and Shower Trim Installation SLF16011-B (Matte Black) SLF16011-SS (Brushed) SLF16011-G (Gold) Specifications: Shower head flow rate: maximum 1.8 gpm at 80 psi Plumbing connection: standard 1/2” pipe fitting Item No. 1 2 3 4 Product Name Shower Head Body Valve Shower Arm Hand Lever Packing List QTY Product Name Item No.
Installation 1. Position valve body in wall. It is recommended the valve to be about 48” above the floor and shower outlet to be about 30” above the valve (Fig. A1) The finished wall should be set between the markers on the temporary protective cover. The recommended depth is 2 11/16” to 3 7/16”. (Fig. A) Make sure the UP outlet is pointed upward. (Fig. B) NOTE: Valve access hole on the wall should be 6” in diameter and outlet hole for shower arm is about 1 1/4” in diameter.
Limited Lifetime Warranty Guarantee Repairs Claims The manufacturer warrants this product to be leak and drip free during daily normal household use 1. Within warranty period, LORDEAR is responsible for repairing any defective product for free. for as long as it is owned by the original purchaser of this product. Please keep a copy of the original 2. Please contact seller by email with this warranty and purchase invoice when the product invoice as proof of purchase.
