SHAMAN INSTALLATION MANUAL SHAMAN Luxury Shower Set Style may vary by mode, bot installation was 8rd the sear NOTE 1. Supply fines should be purged to clean impurities before connecting the unit. 2. The hot water supply should be connected to the left and the cold water supply to the right, when viewed from the operating position, If this is not taken into account-can cause permanent damage tithe cartridge. 3. Screw connections and test for leaks: 4.
{7 2, Water test and Teak detection ] 1, After connecting all pipes, please dis-assembling the plastic protection cover, and switch on/off the cartridge, check all connections without afy leakage, and all connections connecting to the required functional outlets, the plastic protection cover to the valve. 4 8. Wall tiling program 1, Use parallel ruler to make sure the wall and valve being parallel. wall [9. Cover handholds installation | 1. Take off the plastic protection cover. 2.
