22" LCD FHDTV User Guide MODEL EQ2288F
Dear EQD customer, Congratulations on your purchase of an Auria LCD TV by EQD. For maximum benefit of your TV, please read these instructions before any operations. Product Registration For Your Records Product Name: [ ] EQ2288F Auria LCD TV Document Number: [ ] EQ2288F-1M_UG_ENG Rev.
Copyright Information Copyright © EQD®, 2008. All rights reserved. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, EQD® has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: EQD® shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6+) Polybrominated biphenyls
Contents Product Registration ......................................................................................... i Product disposal at end of product life ......................................................................... i Safety Instructions ............................................................................................. i Wet Location .................................................................................................... i Outdoor Use .............................
Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions completely before using the equipment. Keep these instructions in a safe place. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean with a soft, dry cloth. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions.
BATTERIES • Do not cast away batteries in a fire. • Do not disassembled, overheat, or short-circuit the batteries. • If the battery is replaced in the wrong way, it may cause danger of explosion. Replace only with the same or equivalent type. Dispose used batteries. To preserve our environment, dispose of used batteries according to your local laws or regulations. CLEANING Cleaning the AC power plug Unplug the AC power plug and clean it regularly.
Getting Started Package Contents Check the contents of your package. It should contain: • LCD TV • Remote Control with batteries • Auria User Guide • Auria Quick Start Guide • Power Cord Installing the LCD TV Disconnecting the stand Caution Please use the following Auria TVs wall-mount kit only. Auria TV Model No. EQ2288F WMK-10 Auria wall-mount kit model Mounting Auria LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines: • Disconnect the power and any other cables that might hinder moving the LCD TV. • Set the LCD TV on a table or work surface, placing the screen face down on a towel or woolen blanket to protect the screen surface from damage while installing plate.
Front View of the product 4 5 6 7 8 1 2 3 Item Description 1 Power ON/OFF button 2 Power LED Indicator 3 4 5 Remote Control Receiver SOURCE MENU 6 Volume Up 7 Volume Down 8 CH Up 9 CH Down EQD® 9 Turn the power on from standby mode or turn the power off to return to the standby mode. Lights up in blue when the TV is turned on. Lights up in orange when the TV is in standby mode. Receives IR signals from the remote control. Select input source. Turn OSD menu ON/OFF.
Rear View of the Product AC YPbPr PC AUDIO-IN L AUDIO-IN L AUDIO-IN R R CVBS HDMI VGA EARPHONE 1 2 3 Item Power (AC input) 2 PC Audio In 3 Earphone Jack 4 HDMI Input Terminal 5 VGA Signal Input 7 8 YPbPr/ Audio Input (left/ right) YPbPr Signal Input AV/ S-Video Signal Audio Input (left/ right) 9 Composite Video Input 10 S-Video Input 11 TV Input Jack EQD® 5 6 7 8 9 10 11 Description 1 6 4 TV-IN S-VIDEO Plug-in the supplied AC Power cord and connect to the AC input
Connecting the LCD TV YPbPr PC AUDIO-IN L AUDIO-IN L AUDIO-IN R R CVBS HDMI VGA EARPHONE Earphone Personal Computer DVD Player/ VCD Player/ DVD Player/ Game System Personal Computer Personal Computer Blu-ray Disc Player/ PS3 Digital Personal Cable boxComputer S-VIDEO DVD Player/VCD Player/Game System DVD Player/VCD Player/Game System TV-IN VHF/ UHF CABLE Digital Satellite Receiver DVD Player Audio System *Note: For DVI connection please use DVI-to-HDMI cable/adapter.
Using TV Features Remote Control and TV Controls Inserting Remote Control Batteries 1. Remove the battery cover by pulling then lifting the knob on the cover. 2. Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3. Reattach the battery cover. CAUTION • Only use the specified AAA batteries. • Do not mix new and old batteries. This may result in creaking or leakage, which may pose a risk of fire or lead to personal injury.
Remote Control and TV Controls 4 5 6 7 8 1 2 3 9 Button 1 SLEEP 1 AV 2 SLEEP FAV3 3 TV FAV4 4 5 WIDE CC 6 0~9, number buttons 7 SOURCE POWER 2 TV AV HDMI/PC YPbPr WIDE CC MTS PICTURE Description Press to select source to AV mode Press repeatedly to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – Off, 5 Min, 15 Min, 30 Min, 60 Min, 90 Min, and 120 Min.
SLEEP POWER 8 GUIDE 9 CH 10 HDMI/PC 14 11 POWER 15 12 13 YPbPr PICTURE 14 MTS 15 16 FAV 1-4 LAST 17 EXIT 10 11 TV AV HDMI/PC YPbPr WIDE CC MTS PICTURE 12 FAV1 13 FAV2 FAV3 FAV4 Press to display the Electronic Program Guide (EPG). It contains the program information for the channel you’re watching. Press to change the channels up or down. Press to select source to HDMI/PC mode. Press this button to turn the power on from standby mode.
Operation Turning the TV On and Off ALEEP Press the POWER button on the remote control. You can also use the Power button on the front of the panel. TV POWER AV HDMI/PC YPbPr Changing Channels 1. Using Channel Buttons INFO Press CH button to change channels, and the TV changes channels in sequence. You will see all channels that have been memorized. Channels erased or not memorized will not be shown. 2. Using Number Buttons Using the remote control buttons 0-9, select channel for NTSC/ATSC/CATV.
The basic operation is as following: 1.Press MENU to display OSD Menu. 2.Use or to move the cursor bar up and down, so that you can appoint your desired option while OSD menu is enabled. 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. 5.Press EXIT to close the recent page. 6.Press MENU again to leave OSD Menu. PICTURE: 1.Press MENU to display OSD Menu. 2.Use or to move the cursor bar to 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. .
AUDIO: 1.Press MENU to display OSD Menu. 2.Use or to move the cursor bar to 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. . Audio TV Bass Treble Balance BTSC Mode Audio Only Move 6 6 30 Stereo Off OK Enter Exit • • • • Bass: To adjust the bass. Treble: To adjust the treble. Balance: To adjust the left and right audio balance. BTSC Mode: To switch the sound output for TV programs between Stereo, Mono, and SAP. Audio Only Step 1:Press the MENU key to enable the OSD menu.
TUNE: 1.Press MENU to display OSD Menu. 2.Use or to move the cursor bar to 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. . DTV Tune Channel No. Channel Skip System Auto Search DTV CC DTV VCHIP2.0 Def AudioLang DayLight Saving Time Zone Move 11-1 CATV Off English Auto Alaska OK Enter Exit • Channel No.: To change/select the channels. • Channel Skip: Select a channel using “Channel No.” and turn “Channel Skip” off or on to add or erase TV channels.
SETUP: 1.Press MENU to display OSD Menu. 2.Use or to move the cursor bar to 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. . Setup TV Language Sleep Time Parental Control Closed Caption OSD Timer Reset Move English Off Off 60 OK Enter Exit • Language: Changes the OSD display language. The following options are available: English, Spanish, French. • Sleep Time: Enables you to set a time that will elapse before the TV turns off. Options are: OFF, 5, 15, 30, 60, 90,120 minutes.
PC MODE: 1.While in PC source, press MENU to display OSD Menu. 2.Use or to move the cursor bar to 3.Use ENTER to enter the submenu. 4.Press or to adjust the condition. . PC PC Auto Adjust H. Position V. Position H Size Phase Move 52 50 38 47 OK Enter Exit Auto Adjust: Auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. • H. Position: To adjust the horizontal position of the graphic. • V. Position: To adjust the vertical position of the graphic.
3.Select “System”, and select the antenna connection to “AIR” or “CATV”. • AIR: RF signal programs by “Air”. • CATV: RF signal programs by “CATV”. Tune DTV Channel No. Channel Skip System Auto Search DTV CC DTV VCHIP2.0 Def AudioLang DayLight Saving Time Zone Move 4.Select “Auto Search”, then select “Yes” to begin the search. To stop scanning, press EXIT at any time. 5.The Auto Search screen will be shown, and after it is done, the screen will return to the first found channel.
2.Use or to select the menu and press Enter to enter the submenu. 3.Use or to select “Parental Control” from the submenu. 4.Input your password. 5.Select “V-chip” and use or to turn V-chip on or off. To block programs using TV Ratings: 1.Press the MENU button to display the OSD main menu. Parental Control TV Select a Parent type for TV 2.Use or to select the menu and press Enter to enter the submenu. 3.Use or to select “Parental Control” from the submenu. 4.Input your password. 5.
3.Use or to select “Parental Control” from the submenu. 4.Input your password. 5.Select “Movie” to enter the Movie rating screen. 6.Use or to move the cursor bar to different ratings and use or to adjust the conditions.
Other Information Troubleshooting Please contact EQD service team directly if you have questions, service needs, or require technical assistance related on the use of your television. Problem Possible Solution No power • Make sure the power cord is properly connected to the LCD TV AC power socket. • Make sure the AC power cord is properly connected to the wall outlet. • Make sure the DC power button is ON (Blue LED).
Other Information Specifications Model LCD Input signal Compatibility Resolution Table EQ2288F Type 21.6” TFT Active Matrix RGB 0.248 (H) x 0.248 (V) mm pixel Color Filter Glass surface RGB vertical stripe Anti-Glare RGB RGB analog (0.7/1.
