User guide

Quick Start

1. Connections

Connect the AC power cord to the AC socket on the rear panel (5) and power main using grounded

sockets and plugs. Do not turn on the power.

Use an Ethernet cable to connect the Ethernet port on the rear panel (2) to the router. The router

should be connected to the Internet and computer, in order to receive updates and conveniently

transfer files.

Connect the USB digital output on the rear panel (1) and connect it to a DA converter or an amplifier

with a USB digital audio input.

Always make sure that all devices are grounded before making any connections. This should be done

by connecting the power cords using grounded plugs and grounded sockets. In addition, all devices

should be turned off. If the devices are not grounded, a voltage potential difference between devices

can cause a voltage surge through the digital cable that can weaken and eventually damage sensitive

circuits in D/A converters and other devices.

2. iPad Application Installation and Set Up

Using the iPad, go to the App Store and type Aurender in the search window. Install the Aurender

application. The Aurender supports WAV, FLAC, Apple Lossless (ALAC), AIFF, APE and other formats.

3. Selecting the Aurender Music Server

Open the Aurender application and the Aurender Music Server will be shown on the Server menu. The

Aurender must be connected to the Internet and iPad.

Select the Aurender Music Server by tapping its name.

If no server is listed, tap Add Server at the bottom of the window and a window will appear asking for

the IP address. The IP address can be found by pressing the Display Mode button on the front panel

(top left) and keeping it depressed until the front display changes. Release the button. Find the IP

address and enter. To return the display to the normal mode, press the Display Mode button again.

4. Enter Passcode

Please enter the Passcode shown on the front display of the Aurender.