User guide

Front Panel

1. On/Off/Standby - In the default mode, pressing will power the unit on and completely off. In the Standby

mode, pressing the front panel button will put the unit into standby, and the unit will turn on instantly. In

standby mode, to turn the unit off completely, keep the front panel power button depressed until the

button light begins to flash and then release. Flashing will stop when the unit is off. To switch to the

Standby mode, go to the Server Menu under Settings of the Aurender iPad application. Scroll to the

bottom to find the Standby On/Off button.

2. Display Menu - Press to cycle through 2 display options: Song Information and Playlist. Songs from

playlists may be selected using the four buttons on the right side of the front panel display. Use buttons

4 and 5 to scroll between playlists and button 2 to select a playlist. After the playlist is selected, press

button 2 again to start playback. Once the playlist is selected, buttons 4 and 5 buttons can be used to

select songs within the selected playlist. To see the Device Information Display, please keep the button

depressed for about three seconds until the display blinks, release the button and wait. The Device

Information Display with details about Server name, LAN/Wi-Fi status, IP address, and other details will

appear. To return to the normal display, press the button again.

3. Play/Pause - Press to start or stop playback.

4. Play Next - Press to skip to the next track.

5. Play Previous - Press to skip to the previous track.

6. AMOLED Display – To set display mode options, please go to Settings of the Aurender iPad App.

Rear Panel

1. USB Audio Class 2.0 Output - Connect to the USB input of a USB compatible digital-to-analog

converter.

2. Gigabit Ethernet port - To connect to home networks and NAS devices. The Ethernet cable should be

connected to the network router before turning on the Aurender.

3. USB 2.0 data ports - For copying from external USB memory devices.

4. AC Power Switch - Press top to turn on, bottom to turn off. The rear panel power switch should be used,

only after the unit has been turned off completely. Abnormal shutdown or using the rear panel power

button while the unit is in operation or standby can cause the system to to into check mode. In this case,

a message will appear on the display stating that the unit is checking the system.

5. AC Power Socket - Connect to a power outlet with AC Power cord.