User`s guide

MX300 Driver Installation

To install the Monster Sound MX300 Drivers under Windows NT

4.0:

1. From the Windows Taskbar, click Start > Settings > Control

Panel. The Control Panel directory opens.

2. Double-click Multimedia and select the Devices tab.

3. Click Add and select Unlisted or Updated Driver from the

list box. Click OK. The Install Driver dialog appears.

4. Set the path in the Install Driver dialog to D:\WinNT (or

replace D with the letter that corresponds to your CD-ROM

drive). Click OK. The Add Unlisted or Updated Driver dialog

box appears.

5. Select the Monster Sound II driver from the list and click

OK.

6. When the Monster Sound II PCI Audio window appears,

click OK. The MX300 drivers are now loaded into your

system.

Note—The system Restart prompt may appear. Reboot your

system at this time.

NSTALLING SOFTWARE EXTRAS

After you have installed the basic Monster Sound MX300

software utilities, you may install additional software tools and

other bundled applications—such as Zoran SoftDVD—included on

the installation CD disk. To view the software Extras your version

of Monster Sound may contain, insert the installation CD. If your

CD-ROM drive is set to “auto-play,” the Monster Sound

installation program automatically starts. Otherwise, you can

double-click the CD-ROM icon from My Computer to start the

Monster Sound installation program.

When the Monster Sound MX300 installation screen appears,

select Extras to view and install any additional software.