User`s guide

Installing MX300 13
Windows NT 4.0
Software and driver installation for Monster Sound MX300 is a
two-step process under Windows NT 4.0. The following sections
instruct you how to install the MX300 drivers and software.
Notes—(1) Be sure you have already installed the Monster Sound
MX300 hardware. If you have not, complete the hardware
installation instructions that begin on page 6. (2) Because
Windows NT 4.0 does not support Plug-n-Play, the hardware
drivers must be installed manually. Please refer to the following
instructions.
Before Installing the MX300 Drivers…
Insert the Monster Sound installation CD into your CD-ROM
drive. If your system has the CD-ROM set to “auto-play” or “auto
start,” the Monster Sound installation program will begin
automatically. Select Installation from the available options and
the Setup program will begin.
To complete the Monster Sound MX300 software installation…
1. Click Next when you see the installation Welcome screen.
2. Select a Destination Directory and click Next. We
recommend you use the installation default directories.
3. A dialog box appears and prompts you to select which
components you want to install. For Windows NT, Audio
Utilities is the only available option. Click Next.
If you do not want the MX300 Audio Utilities loaded, click
the check box to deselect it, then click Next.
4. Click Next again to install the selected application.
5. The Monster Sound II Setup window notifies you that the
installation is complete. Click Finish.
6. The System Settings Change dialog appears and requests
you to reboot your computer. Click Restart Now.