User`s guide

Installing MX300 9
1. Click Next.
2. You are prompted with two options for finding the drivers.
Select Search for the best driver for your device. Click
Next.
3. You are offered several search options. Select the Specify a
location check box.
4. Insert the Monster Sound MX300 Installation CD into your
CD-ROM drive and set the path in the install window to
D:\WIN9X (or replace D with the letter that corresponds to
your CD-ROM drive). You can also click Browse and
navigate to your CD-ROM drive.
5. Windows confirms that it has located the drivers for the
Monster Sound II Multifunction Parent. Click Next.
Note—If the drivers could not be located, click Back and
verify that the correct path to the Monster Sound MX300
installation CD has been entered.
6. Windows 98 now copies the Monster Sound MX300 driver
files to your hard drive and informs you when the task is
completed. Click Finish.
Additional drivers will now be installed. Please wait until
Windows 98 finishes loading all drivers—which may take an
extra minute or two.
After all driver files have been installed, the Monster Sound II
Setup screen appears.
To complete the Monster Sound MX300 software installation…
1. Wait until the Welcome screen appears and click Next.
2. Select a Destination Directory and click Next. We
recommend you use the installation default directories.
3. From the available options, select the software you want
installed and click Next.
4. Click Next again to install the selected applications.
5. Click Finish and reboot your computer, if prompted.
Continue with
Installing Software Extras on page 14.