ISO-ARMOR-2 Pro Isolation Chamber for Recording Microphones Owner’s Manual ISO-ARMOR-2 Owner’s Manual 1
Thank you for choosing Auray. The Auray ISO-ARMOR-2 is a lightweight and compact isolation chamber that is specifically designed for recording or broadcasting in acoustically untreated rooms. Ideal for capturing vocals, voiceovers, or podcasts, it mounts directly onto your microphone and minimizes ambient room noise and acoustic reflections with a double layer of acoustic isolation.
Overview Pop screen Microphone hole 1 ISO-ARMOR-2 shield 2 5 Shock mount adapter Locking screw 3 Insert rings Recording hole 4 Suspension bands 6 7 8 5 1 3 2 4 8 6 ISO-ARMOR-2 Owner’s Manual 7 3
Setting Up the ISO-ARMOR-2 1. Loosen the locking screw, and remove the pop screen by sliding it up and out of the bracket. 1 2. Remove the shock mount adapter from the microphone hole. 2 3. Insert the bottom end of the microphone into the center of the shock mount so the grille is visible over the shock mount. 3 4. Insert the microphone and shock mount adapter into the ISO-ARMOR-2 up through the microphone hole.
Note: Shorter microphones can also be placed into the shock mount adapter and inserted into the ISO-ARMOR-2 through the front of the shield. 5 5. 6. Place the assembly onto your microphone’s shock mount, and connect the microphone cable. 6 5 6 Replace the pop screen, and tighten the locking screw. You’re ready to record. Replacing the Shock Mount Suspension Bands The shock mount adapter has two sets of suspension bands. If they break or become loose, follow these steps to replace them: 1. 2.
3. Replace the insert ring by screwing it on clockwise and tightening by using a pen tip or screwdriver. 3 Specifications Material: Shield: Aluminum Interior: High-density open-cell acoustic foam Dimensions (H × W × D): 7.25 × 8 × 7 in. (18.4 × 20.3 × 17.8 cm) Weight: 1.4 lb.
One-Year Limited Warranty This Auray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG3
