User Manual

6 BAE SeriesOwner’s Manual
1
2
3
4
Adding the riser:
1. Loosen the insert hole locking knob
on the desktop mount and insert the
mounting stud of the riser into the
insert hole. Secure it by tightening
the insert hole locking knob.
1
2. Loosen the riser locking knob
and insert the base stud of the
broadcast arm into the riser insert
hole. Secure it by tightening
the riser locking knob.
2
Adjusting the microphone angle
1. Loosen the microphone adjustment
locking knob and adjust the
angle of the microphone.
3
2. Tighten the microphone
adjustment locking knob.
Adjusting the tension on
the broadcast arm
1. To support heaver microphones
up to 3.6 lb., tighten the tension
knob until the microphone is
securely held in place.
4