User Manual

ManualsBrandsAuray ManualsPop & Reflection FiltersAcoustic Reflection Filter with Floor Stand and Accessory Tray Kit

1

2

3

4

5

6

7

5RF-PBO-16 Owner’s Manual

1

5

6

7

Inverted Setup

1. If the L bracket is not attached

to the ﬁlter: Align the slot on the

ﬂat side of the L bracket with the

screw holes on the back of the

ﬁlter. Tighten the two locking

screws until secure.

2. Screw one of the thumbscrews

onto the threaded post of the

mic mount on your mic

boom.

5

3. Invert the ﬁlter, and place

the thumbscrew’s threaded

post through the slot on the L

bracket.

6

4. Attach the second thumbscrew

to the ﬁrst thumbscrew to

secure the ﬁlter. Tighten until

secure.

6

5. Screw the extender onto the

post of the top thumbscrew.

7

6. Attach your shock mount to

the extender, and secure it by

tightening the star nut. Mount

your microphone into the shock

mount.

8

8