Aura ANCbuds User Manual Packing List Charging bin*1 Bluetooth headsets left and right (* 2) Type-C*1 Type-C charging cable *1 Silicone earcaps * 4 User manual *1 Product parameters Product name Active noise cancellation bluetooth headset Bluetooth version 5.
Product Introduction Indicator light of charging bin Reset key Type-C charging port Press area
Function introduction Charging bin Operation Status of indicator light of charging bin Status of function of charging bin Open charging bin Orange light is constantly on for 13 seconds Power less than 20% Green light is constantly on for 13 seconds Power more than 20% Orange light is constantly on for 3 seconds Power less than 20% Green light is constantly on for 3 seconds Power more than 20% Orange light is constantly on for 13 seconds Power less than 95% Green light is constantly on for 13 s
Method of use Operating steps Turn on: open the charging bin, and the headset automatically turns on. Pair: open device "Bluetooth" and open charging bin, and then click Aura ANCbuds to connect. It spends about 3 to 5 seconds from turning on the headset to pair at the first use. It only needs to open the charging bin and then the headset will automatically connect with the device (please ensure the device Bluetooth has been turned on) for next time of use.
Non-warranty regulations A. Beyond the warranty period; B. Any failure to use, maintain or repair the product in accordance with the requirements of the user manual, resulting in damage and dirty appearance; C. Any damage caused by the disassembly by non-Vifa authorized repairers; D Any water inlet, scratches, accidental drop or other accidents not caused by Vifa. Q&A 1. 2. 3. 4.
Names and contents of hazardous substances in the product Parts name Hazardous substances Lead Mercury Cadmium Hexavalent chromium Polybrominated biphenyls Polybrominated diphenyl ethers X O O O O O X O O O O O Headset Charging bin This table is prepared according to SJ/T 11364. It means that the content of the toxic and hazardous substance in all the homogeneous materials of the component is below the limit requirements specified in GB/T 26572.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
