User manual

The number of message will display.
3. Schedule Setting :
Press K5 (+/Mode/^) for more than 2 seconds to enter
Schedule Setting Mode.
a. Press K3 (</Rep) or K4 (>/Scan) to select the setting
of month, date, hour or minute.
b. Press K5 (+/Mode/^) or K6 (-/v) to select the data, the
data will increase or decrease continuously if hold.
c. Press K5 (+/Mode/^) for more than 2 seconds to confirm
and quit. It will enable automatic. The “BELL” on LCD
will display. You can change it after setting. The
Process is same as setting.
4. Schedule Cancel:
Select the message and press K7 (Del) less than 2 seconds
you can disable it. The “BELL” on LCD will display or not
means it is enable or disable.
This function will disable when it has executed once. You can
reset it if you want. When the time arrived, it will happen
4 “Bi”, and later it will play back the message you selected.
(3) TIME Mode :
It will display the week, and display the clock, date and
year in order. Every will display 2 seconds. The “BELL” on
LCD means the alarm feature is enable. The “H” means hour,
the first “M” means month, “D” means date, “S” means second,
the second “M” means minute.
1. Mode change :
Press K3 (</Rep) or K4 (>/Scan) for less than 2 seconds
to select OGM Mode or To Do Mode.
2. Setting the clock :
a. Press K5 (+/Mode/^) for more than 2 seconds to set time.
The “TIME” on LCD will blink.
b. Press K5 (+/Mode/^) will enter the setting mode. The
data of year on LCD will blink.
c. Press K3 (</Rep) or K4 (>/Scan) to select the setting
of year, month, date, hour or minute.
d. Press K5 (+/Mode/^) or K6 (-/v) to select the data. The
data will increase or decrease continuously if hold.