User Manual

bluetooth
location
Make sure Bluetooth is on. Make sure Bluetooth Authorization, GPS and
Localisation are allowed on your device.
In the back of scale, pull out the insulation sheet, then place the scale
on a hard flat surface. Step onto the scale with a single foot
to activate it. Wait until the display shows “0.0lb”.
Pair the scale through Bluetooth. Make sure the scale is on when pairing.
Leave the app on its main screen, it will connect automatically.
4
5
6
The app will show
your data within
a few seconds.
8
You could also
click “Device”
and find the scale
via bluetooth ID:
Aura Curve.
7