Please read this manual before using the scale and keep it for future reference.
Download the Fitdays App from the Apple Store or Google Play. Remove the plastic sheet from the battery cover. Place the scale on a hard flat surface. Measure with bare feet and make full contact with the sensors. Turn on the smart app and connect to the scale before measuring. Follow the instructions below and make sure your posture is correct before measuring. Keep your arms straight at 45 degrees or at a 90 degree angle. All fingers must line up with the electrode pad. Arms not straight.
THANK YOU FOR YOUR PURCHASE! Aura Full Body Analysis Scale uses bio-electrical impedance analysis (BIA) technology to help you conveniently measure body weight, body balance, body fat rate, visceral fat, body water, skeletal muscle rate, muscle mass, bone mass, protein, BMR, body age and more. WARNING DO NOT use with medical implants such as pacemakers. DO NOT stand on the edge of the scale or jump on it. DO NOT overload the scale (Max.180kg/440lb/28st).
INDICATION SYMBOLS The batteries in the scales are exhausted. Insert new batteries (see the "Replacing the Batteries” chapter). The scale is overloaded. More than 180kg are on the scales. An error has occurred during the reading. Step off the scale, wait 5 seconds and then step on again to restart the process.
INSTALL THE FITDAYS APP Scan the QR Code or download the Fitdays app from the Apple Store or Google Play. Download and install the Fitdays app on your device. The App icon will appear on your phone or tablet after the installation is completed. INSTRUCTIONS FOR USE Open the Fitdays app on your device. Register your account by email or login with social media account. Add your personal data and confirm.
4 Make sure Bluetooth is on. Make sure Bluetooth Authorization, GPS and Localisation are allowed on your device. bluetooth location 5 6 In the back of scale, pull out the insulation sheet, then place the scale on a hard flat surface. Step onto the scale with a single foot to activate it. Wait until the display shows “0.0lb”. Pair the scale through Bluetooth. Make sure the scale is on when pairing. Leave the app on its main screen, it will connect automatically.
TROUBLESHOOTING BLUETOOTH ISSUES If the regular connection to Bluetooth failed, please try the below steps: Reset the scale by taking out one battery for 5 seconds and putting it back in. Reset the Bluetooth connection. Ensure Bluetooth and GPS (Android only) are enabled on your device. Under the "Account" section, select the “Device”. Slide it left to delete the current device. Tap "+" on the top right to enter pairing mode. Step onthe scale with single foot to activate it.
HOW TO RESET THE SCALE Step on the scale to turn it on. Let it automatically drop to 0.0kg to calibrate. THE SCALE DOESN’T TURN ON Check if the insulation sheet has been pulled out. Check if the batteries have run out and change them if necessary. FREQUENTLY ASKED QUESTIONS How to get the most accurate result? Stand completely still on the scale. Weigh in at the same time each day to ensure the most accurate results. Ensure that the scale is placed on a hard flat surface.
NOTES Model: BS20 Made in China
THANK YOU FOR PURCHASING THE AURA FULL BODY ANALYSIS SCALE
