User Manual

48
EN
• Gateway address
• Primary DNS
• Secondary DNS
Manual settings
Choose DHCP enable/disable
NetRemote PIN setup
Allows you to dene a PIN number to be entered before being able to
connect to radio remotely over a network
Network prole
This displays a list of the networks remembered by radio (up to a maximum
of 4). You can see the list of registered networks through Menu > System
settings > Network > Network prole>. From here you can delete unwanted
networks by turning and press OK then conrming delete Yes.
Clear network settings
This option will clear current network settings, to allow you to join an
alternative network more easily.
Time/Date
• Set Time/Date
• Auto Update
• Set Format
• Set Timezone
• Daylight savings
Set Time/Date
The date and time are displayed as dd-mm-yyyy with the rst value, dd,
active (ashing). Adjust each value with the remote control. As each value is
set by pressing the remote control, the next value becomes active ready for
adjustment.
Auto-update (from DAB, FM or Network)
Auto-update works with data sent over DAB, FM or the Internet. The clock
is only updated when in a corresponding mode, so it is best to select a
mode you use regularly. DAB and FM use time signals broadcost with radio
transmissions. Network uses a time signal sent from the internet radio
portal when in any network-connected mode.
1. Select Update from DAB, update from FM, update from Network or No
update.