SC1 Audio Clock User Manual
Preface Dear Customers: Thanks for purchasing the aune SC1 and congratulations on choosing this high-quality audio clock . We sincerely hope the SC1 will bring you excellent Hi-Fi experience. Please read this manual carefully before using the device.
SC1 at a Glance Warm-up indicators: Red“ WARM”: warming up White“ RTF ON”: warmed up Clock output on/off
SC1 at a Glance 10MHz sine wave output 10MHz square DC power input wave output The 4 clock outputs can work simultaneously.
Introduction The SC1 is a high-steady-state low-jitter audio clock designed to provide high-quality clock signals to digital audio devices. The four 10MHz outputs (sine wave*2, square wave*2) can work simultaneously. Specifications Output Frequency Output Power Output Waveform Frequency Accuracy (factory) Jitter (OXCO output) Warm-up Time Phase Noise 10MHz*4 10MHz >7dBm (50Ω) 2*Square wave/2*Sine wave < ±0.
Operations Clock Output Use a BNC cable (75Ω) to connect the S9c and the SC1. Enable clock input on the S9c.
aune ⼁ 430034 WUHAN ⼁ CHINA Email: sales@auneaudio.com ⼁ Fax:+86-27-85840435 ⼁ www.auneaudio.
