User Manual

39
EN
TROUBLESHOOTING
Should you experience diiculties in the use of this player, refer to the
following chart.
Problem Possible Cause Solution
No power The unit is disconnected
from the AC outlet.
AC outlet is not function-
ing.
Reconnect to the AC
outlet.
Change to another outlet.
Remote control does
not work
Battery empty
Installed battery wrong
polarity
Too far from the main
unit.
Replace battery
Re-install battery in cor-
rect polarity.
Reduce the distance.
No sound Select wrong source
input.
Select correct source
input.
Sound is distorted Volume level is set too
high.
Decrease the volume
level.
Unit gets warm after
extended play at high
volume
This is normal. Turn the unit o for a
period of time or lower
the volume.
Speaker cannot be
connected via BT
BT is switched o at the
audio source.
The speaker has already
connected with another
device via BT.
Switch on the BT function
in the audio source.
Press and hold the BT
button on the remote
control for 3 seconds to
break the current connec-
tion and initiate pairing
mode.
No sound when playing
audio via BT
Your BT device has not
been paired.
The volume control of
your BT device is set at
too low.
The volume control of
main unit is set too low.
Pair the speaker again to
the audio source.
Increase the volume of
your BT device.
Increase the volume of the
main unit.
Poor sound quality from a
BT device
BT device is almost out of
range of the Sound Bar.
Move your BT device
closer to the Sound Bar.