Users Manual

Device Pairing

Automatic Pairing

GA1000 Series

The Display Unit automatically detects and connects to the Thermometer Module in

the same starter kit. Press the "PAIR" button on the MAIN screen to force the system

pairing when the connection is not established automatically.

GA2000 Series

The Receiver/Transponder automatically detects and connects to the Thermometer

Module in the same starter kit only when the connection between the Display Unit

and the Receiver/Transponder has been established first.

Manual Pairing

Follow the below instructions to manually setup pairing.

Step 1: Turn on the Display Unit.

Step 2: In the Setting menu, select “PAIRING”. (for GA1000 Series)

In the Setting menu, select “PAIRING”→“SENSOR MODULE”. (for GA2000

Series)

Step 3: Scan the QR Code or key in the serial number located on the back of the

Thermometer Box.

Step 4: Check if the serial number (SN) displayed matches with the one on the

Thermometer Box.

Step 5: Press “CONFIRM” on the Display Unit.

Step 6: Assemble the Thermometer Box and the Sensor Patch to power on the

device.

Step 7: To confirm that the process was successful, ensure that the Bluetooth

NOTE: The Thermometer Module must be placed within 32.8 feet (10 meters) to the

Display Unit (for GA1000 Series), or to the Receiver/Transponder (for GA2000 Series).

NOTE: The Bluetooth connection status icon will turn blue once the pairing succeeds.

NOTE: Up to two (2) Thermometer Modules can be stored on the Display Unit.