User manual

English
5.5.2 Station presets
The unit allows you to store up to 20 FM stations for fast tuning.
5.5.2.1 Save a station
1. Whilst the station you would like to save is playing, press and hold the PRESET
button until Preset Store displays on the LCD.
2. Press “<” or “>” button to choose the preset memory position, press the OK
button to confirm the settings.
5.5.2.2 Recall a station
1. Press PRESET whilst in FM mode to open the list of preset stations.
2. Press “>” or “<” button to select the preset station.
3. Press OK button to confirm.
5.5.3 Now playing information
When available, the station name and ‘Radio Text’ information will display on the
LCD for the playing station. If no information is available through RDS, just the
frequency and ‘No Radio Text’ message will display.
Press INFO to cycle through: RDS RadioText, program type, frequency,
mono/stereo and time and date for the current station.
Press and hold the INFO button to return to the default Now Playing screen.
5.6 USB/SD Mode
1. Connect your USB device or SD/MMC card to the unit.
2. Press the M button to select USB or SD mode, “USB” or “CARD” will appear on
the screen. The music stored on the USB or SD card will be played automatically
once the content scanning is finished.
3. Press button to pause or resume playback.
4. Press “<“ or > button to skip to the previous or next track.
5. Press “PRESET” button to change the repeat mode between Repeat-1 and
Repeat All. The default repeat mode is Repeat All.
5.7 Audio-in Mode
Audio-in mode plays audio from an external source such as an MP3 player, mobile
phone or laptop.
1. Use the 3.5mm audio cable to connect from the headphone or line out socket of
your source device to the Audio-In socket on the MB400.
2. Press the Standby button to exit standby mode.
3. Press the M button to select AUX mode.
4. Press play on your source device, any sound that would normally play through its
speaker will now play through the MB400.
Note: Volume can be adjusted on either the source device or the MB400.
5.8 Sleep Timer
The Sleep timer function allows you to set the device to automatically shut down
after a specific period of time.
1. Press the Zz button to choose the sleep delay time, in minutes,
from: off /1/20/30/60/90/120.
2. Press the OK button to confirm; whilst the sleep timer is active “ ” will
display on the LCD.
3. Select “Sleep off” to cancel sleep mode.
Note: When the sleep timer is active, press the Zz button to show the remaining
time before the device shuts down.
5.9 Clock Setting
Press and hold MENU button to enter the clock setting mode. Press MENU to
switch between year-month-day-hour-minute settings. Use “<” and “>” to adjust
the value. After adjusting the settings, press the MENU button to confirm and exit
clock setting mode. After 1 minute's inactivity, the device will confirm and exit
clock setting mode automatically.
5.10 Alarm Clock
The alarm clock can be set with two separate wake up times, each alarm can be
configured to buzzer, last active station or preset FM or DAB station. An active
alarm is indicated by a bell icon on the left side of the LCD screen.
-9-
-10-