MB400 EN Bluetooth Speaker with DAB/DAB+/FM Radio FR Haut-parleur Bluetooth avec DAB/DAB+/FM Radio DE Bluetooth Lautsprecher mit DAB/DAB+/FM Radio IT Altoparlante Bluetooth con DAB/DAB+/FM Radio ES Altavoz Bluetooth con Radio DAB/DAB+/FM Radio
User Manual Safety To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the MB400, it can be unsafe and will invalidate the manufacturer's warranty. Disposal Please ensure the product and accessories are disposed in compliance with WEEE (Waste Electrical and Electronic Equipment) Directive and other regulations in your country.
1. Safety Instructions 2. Main Features Storage and Use Keep the device away from wet or damp environment. Never expose the device to moisture, dust, oil or smoke. Avoid dropping or exposing to impacts. When carrying this device as part of your luggage please ensure it is securely stored to avoid impact damage. Never strike or scratch this device with any sharp object. 3. Accessories 1) AC Power Adaptor 2) 3.
5. Operating 4. Device Layout 2 3 4 5 6 7 8 9 5.1 Power 10 1 11 When you first switch the device on, the time display will flash 00:00. The time will automatically be set when you enter DAB mode. You can also set the time manually, see 5.8. 12 20 17 13 14 15 16 18 Standby: The device begins in standby mode, press the Standby button to begin use. Model No.: MB400 Power Input: DC 5V/1.5A 21 5.2 Modes 1.
3. Select “MB400” from the available devices, the system will install the driver automatically. Note: For Windows XP and Vista, a third-party Bluetooth driver is needed (not included). -NFC 1. Enable Bluetooth and NFC on your source device. 2. Switch on the MB400 and enter pairing mode. 3. Touch the NFC area of your source device against the NFC area on the left side of the MB400. They will autocratically pair with each other. 4. Confirm Bluetooth pairing if prompted.
5.4.6 Dynamic range compression (DRC) The Prune function can be used to remove any stations that are saved to your DAB radio list but not available. This function will remove all stations that are listed with a “?” in front of the station name. DRC balances the differences in volume between the loudest and quietest audio being broadcast. This can reduce the need to adjust volume when the sound being broadcast changes volume. 1. Press Menu then use “>” and OK to select Prune from the submenu 2.
5.5.2 Station presets 5.7 Audio-in Mode The unit allows you to store up to 20 FM stations for fast tuning. Audio-in mode plays audio from an external source such as an MP3 player, mobile phone or laptop. 5.5.2.2 Recall a station 1. Press PRESET whilst in FM mode to open the list of preset stations. 2. Press “>” or “<” button to select the preset station. 3. Press OK button to confirm. 5.5.
5.10.1 Set the Alarm Clock 6. Specifications 1. Press & hold the SNOOZE/DIM button until “Alarm 1 Setup” displays on the LCD screen, to set alarm 2, press and hold the SNOOZE/DIM button again until “Alarm 2 Setup” displays. On time – hours and minutes Duration – 15 | 30 | 45 | 60 | 90 minutes. The alarm will automatically stop after the selected time.
8. Warranty The FM signal may be too weak play the program. Please fully expand the antenna or adjust the position of the radio. This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.
