User manual

-7-
Fully charge the battery before using the device for the
first time.
Normally it takes about two hours for the battery to be
fully charged. When charging the battery, the power
indicator light will turn red, when fully charged, the
light will turn off.
The video playback time is about 3 hours when the
battery is full charged. It is normal the device becomes
warmer when in use.
When the battery reaches a low level, a low battery
symbol will show on the LCD screen, the device will
turn itself off automatically after the battery is gone.
Fully charge the battery when it will not be used for a
long period of time.
Switching off the device while charging the battery can
shorten the charging time and extend the life of the battery.
A lithium-ion battery only provides a limited number of
discharge/charging cycles. The playback time of the
device will reduce gradually during the lifetime of the
battery.
Do not attempt disassemble or replace the battery, as
this will invalidate the warranty. Any repairs must be
carried out by either the manufacturer or their nominated
service centre. Parts inside this device are subject to high
voltage.
6. Rechargeable Battery
-8-
7. Main Menu
1. Press MENU, the main menu will show as below:
2. Use CH+/ and CH-/ to select the following mode:
Digital TV: Change settings in Freeview TV (DVB-T) mode.
Movie: Play movie files from a SD card or USB memory stick.
Music:PlaymusicfilesfromaSDcardorUSBmemorystick.
Photo: View photos from a SD card or USB memory stick.
Games: Play built-in games.
Setup: Change system settings.
3. Press ENTER to confirm.
8. Freeview TV (DVB-T)
When turning on the device for the first time, “Initial Install”
will show, follow the instructions to select OSD Language
and Area, press ENTER to confirm and exit. As this is the
first time using the device, no channel information has been
stored, it will show “Database Empty”. To search for
channels, please follow the instruction 8.2.1.
8.1 First time turn on the device