User manual

-9-
4.Connection
4.1 Connecting the power supply
1.Connect the DC output of the AC/DC adaptor to the DC IN 12V jack on
the device.
2.Plug the power adaptor into the AC power socket.
4.2 Connecting the earphones
Connect the earphone plug to the earphone jack on the device.
*Note:
If earphones are used, sound is only transmitted through the earphones, and
no sound is available from the stereo speakers of the device.
*Note:
1.Please ensure proper disposal of used batteries.
2.To prevent leakage of fluid from the lithium battery, remove the battery when
not using the remote control for a long period of time. If the battery leaks fluid,
carefully wipe it out of the battery case, then change to a new lithium battery.
Earphones
1
2
5. First Time Installation
5.1 Turning on/off the device
5.1.1 Turn power on
5.1.2 Turn power off
5.2 Initial installation
Connect the device to the mains power, switch the power button on the side of the
device to ON.
If the device is on standby, press POWER on the remote to switch it on.
Switch the power button on the side of the device to OFF, or press POWER on the
remote to switch to standby.
When turning on the device for the first time, “Initial Install” will show, follow
the instructions to select OSD Language and Area, then press ENTER, it will ask
whether to install, select YES, the auto search will then start. Once the search has
finished, press , or EPG to select channels. Press TV/RADIO to switch
between Freeview TV and Radio channels.
-10-