User manual

-15-
5. Saturation: press to enter the
list, use / to select, press
ENTER to confirm, press ENTER
again to exit the setting, or press
/ to select another option.
3. Contrast: press to enter the list,
use / to select, press ENTER
to confirm, press ENTER again to exit
the setting, or press / to select
another option.
4. HUE: press to enter the list, use
/ to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press / to select
option.
another
6. After setting, press ENTER to confirm,
press MENU to exit the setup, it will
show “Successfully updated”.
1. Aspect Ratio: press / to select
between 16:9, 4:3 Pan Scan, 4:3 Letter
Box, press ENTER to confirm and exit the
setting. Or press / to select
another option.
2. Brightness: press to enter the list,
use / to select, press ENTER to
confirm, press ENTER again to exit the
setting, or press / to select
another option.
Press / to select an option, use /
to change the settings.
After setting, press ENTER to confirm,
press MENU to exit the setup, it will
show “Successfully updated”.
6.3.3 System Setup
6.3.4 Time
You can set EQ Setup, Surround,
LCN (Logical
Channel Number) and Area in System Setup.
JPEG Effect,
JPEG Autoplay Duration,
You can set Timer Mode, Date, Time, GMT
Offset, and Summer Time under Time menu.
There are two Timer modes, one is Auto,
and one is Manual.
The system default is Auto timer mode,
press / to select Timer Mode or
GMT Offset, use / to change.
Left of the menu lists all the options. Press
/ to select an option.
This option allows the users to set their
preferred TV output settings.
6.3.2 TV
-16-
In Manual timer mode, press /
to select an option, use / or
numbers to change the Date, Time, GMT
Offset or Summer Time.
After setting, press ENTER to confirm,
press MENU to exit the setup, it will show
“Successfully updated”.
6.3.5 Parental Lock
User can change system password under
this option.
6.5 Factory Default
To restore the system configuration to factory
default, press MENU, select Digital TV->
Factory Default, press ENTER.
Enter the old password, if it is correct, the
cursor will move to Enter New Password
option, enter and confirm the new password.
The system will show “Password changed”.
The system default password is 0000.
6.4. Software Upgrade
This function is for manufacturer use only.
It will ask whether you want to perform the
factory default, select [No] to cancel or
select [Yes] to confirm.
7. Digital TV Recording
The device supports recording Freeview TV
to a USB memory stick or external hard
drive (FAT32, USB2.0) via the USB port.
Before starting the recording, connect a USB
stick or external hard drive, which has
sufficient space left, to the device first.
Press REC on the remote to start the recording,
it will show “REC” on the screen, press REC
again to stop the recording, it will ask “Do
you want to stop recording”, choose “Yes”
to stop or “No” to carry on recording.
Press YELLOW during the recording, it allows
you to set the duration of the recording, press
RIGHT to choose: 15 min, 30 min, 45 min,
60 min, 75 min, 90 min, 105 min, 120 min or
disable, press ENTER to confirm and exit.
Press INFO during the recording, it will show
how long the device has been recording for,
the name of the channel, and how many space
has left on your USB stick or external hard
drive, press INFO again to exit.
The recorded program is saved in a new
folder “PVR” in your USB stick or external
hard drive and is in MPG video format. It
can be viewed by pressing MENU then
selecting Movie.
Press MENU, then select Disk Manger, it
shows all the recorded programs stored in
the USB stick or external hard drive, press
GREEN repeatedly to select Play/Delete One
/ Delete All/ Rename a recorded program,
press ENTER to confirm, press MENU to
exit at any time.
6.6 Version
This provides the hardware, software and
system information.