User manual

-12-
POWER
EJECT
Keep pressing
7. DVD Player Operation
After the system is connected, you can use
the unit in DVD mode. Before use, please
follow the instructions below:
Step 1: Press POWER to turn on the unit
and it will begin to read the disc as follows:
If there is no disc, the display will show:
Step 2: Press EJECT, the disc inside will
pop out automatically.
Playing Disc
This unit will begin to play after reading
the disc.
Press to pause playback.
To return to playback, press again.
Press to choose the previous track or
chapter.
Press to choose the next track or
chapter.
Press to search forward at different
rate. The player will search the track
at 2, 4, 8, and 20 times of the normal speed.
-11-
Press to search backward at different
rate. The player will search the track
at 2, 4, 8, and 20 times of the normal speed.
Pause
PREV
F.FWD
Next
PLAY
OPEN
NO DISC
READ
Press to stop playback.
DISPLAY
Display
Display
Subtitle
7.1. Basic Operations
7.1.1. Display
During playback, pressing DISPLAY on
the remote control will show the
following:
For DVD disc:
The first time DISPLAY is pressed, the
play time of the chapter will show.
The second time DISPLAY is pressed,
the language, subtitle and angle
information will show.
For DVD, Super VCD disc:
Pressing DISPLAY, the single track play
time, track number and PBC will show.
7.1.2. Subtitle
Press SUBTITLE repeatedly to select
subtitle language. (Up to 32 different
languages, only for the discs with this
function.)
Language
7.1.3. Language
Press LANGUAGE repeatedly to select
audio language, up to 8 different audio
languages. (4 for SVCD/CVD discs and
only for the discs with this function.)
During playback, press TITLE to enter
the TITLE menu and select by
pressing or numbers
during DVD playback.
7.1.4. Title
7.1.5. Move Selection
During playback, pressing UP, DOWN,
LEFT, and RIGHT allow the user to easily
select Title, Directory or Menu settings.
\\ \
\\ \
F.REV
STOP
Title1/1 Chapter
English
Close
No
Track3/15
Chinese
Chinese
Keep pressing