Owner's Manual

5. Attach the cover
Press the cover onto the DoorSense™ Unit.
Calibrate your Lock
Once the lock is set up, navigate to the Lock Settings and select Calibrate
Lock and select LOCK AND DOORSENSE. Follow the instructions in the app
until you have successfully calibrated your August Smart Lock and
DoorSense™ together.
Open and close the door and validate that the door state is accurate. If it is not
accurate or the calibration was unsuccessful, relocate the DoorSense™
housing closer to the August Smart Lock and go through the calibration
process again until you get accurate results.
If you elected to not insert the screws into the door frame, go back and insert