Installation & Assembly

STEP 1
Cam Lock Screw
C
STEP 2
Insert Cam Lock Screws into
the pre-drilled holes of
Side Panels (C) and tighten.
(See Figure 1)
Assemble Side Panel (C) and
Rail (B) using Cam Lock.
(See Figure 2)
Place the unit onto Top (A).
Figure 2
Figure 1
A
C
C
B
B
A
Cam Lock
Remove the Drawer from Top (A).
Assembly Instructions 2/5
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.