Owner Manual

Product Name:
Resin Rustic Cascading Pots Outdoor Fountain
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.
MAINTENANCE OF YOUR FOUNTAIN:
• Unplug the pump from electric power before servicing, cleaning, or moving.
• Keep water clean - using clean water will reduce mineral deposits and improve water clarity.
• Clean the fountain periodically to prevent mineral deposits and contamination. Use warm soapy water and a
stiff brush for heavily stained surfaces. Do not use harsh chemicals as this will damage the finished
surface and void the warranty.
• Add clean water periodically to ensure that the pump is fully submersed in water.
• Disconnect the power and empty the basin if the fountain will not be used for an extended time.
• If installed outdoors and in a freeze-area of the country, ensure that all water is removed and the unit is
completely dry. This product is NOT to be operated below 41
℉ (5℃) freeze damage may occur.
S
pecial Warnings and Cautions:
CAUTION:
• The pump has been evaluated for use with water only.
• Do not use the pump in water exceeding 35ºC / 95ºF.
• Do not use the pump in flammable liquids.
• Do not use the pump for industrial purposes.
• Do not use the pump in vehicles or on ships or aircraft or swimming pools.
• Do not use the pump in location where special conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapor or gas).
• Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
• Do not lift the pump by its power cord.
• Keep the plug dry. Do not expose the plug to water or steam.
• Before connecting to the power source, make sure that the pump is assembled and completely submerged in
water.
WARNINGS:
• To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle.
• To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any
dimension.
• Do not exceed the voltage shown on the pump.
• Always disconnect the pump from the power source prior to beginning any maintenance or work on the pump
or fountain.