Assembly Instructions

ASSEMBLY INSTRUCTIONS

Description

Dimension

: 18”Wx22”Dx38”H

Cube Size : 39.5”x19.2”x11”

NW: 30.8 LBS

GW: 37.4 LBS

: VERTICAL SLATTED BACK CHAIRS

VERTICAL SLATTED BACK CHAIRS

- 1 -

PAGE 1
ASSEMBLY INSTRUCTIONS Description Dimension Cube Size : VERTICAL SLATTED BACK CHAIRS : 18”Wx22”Dx38”H : 39.5”x19.2”x11” NW: 30.8 LBS GW: 37.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing our product. This product has been designed for easy assembly and long lasting use. Please take the time to read and follow the assembly instructions carefully Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
PAGE 3
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Long bolt 1 2 (M6x80mm) Sketch 4 (M6x60mm) Lock Washer Short bolt 2 4 10 (∅6.5x9) (M6x40mm) Flat Washer 5 Qty Medium bolt 4 3 Description Allen Key 10 6 (∅6.5x19) 1 (4mm) STEP 1 Attach frame (B) to the back (A) by using bolts (3) and (1) and washers (4) and (5). Tighten with Allen Key (6).
PAGE 4
STEP 2 Attach front legs (C) to the seat frame. Use bolts (2), washers (4) and (5).Tighten with Allen Key (6). . STEP 3 Put the chair on a flat level surface to make sure the chair is level and then tighten the all bolts. C he c k to m a ke su re tw o e d g e s a re flu sh o r a lig ne d . Othe rw ise , the c ha ir w ill b e w o b b ly .