Assembly Instructions

ManualsBrandsAugust Grove ManualsFurnitureMixon Upholstered Dining Chair

DESCRIPTION

NO.

Q'TY

CHAIR BACK

(1)

1PC

FRONT LEGS

1PC

SEAT CUSHION

WITH FRAME

SKETCH

PART LISTS

(2)

(3)

STT

Q'TYSIZE

Allen key 4mm

Flat Washer 1/4'' x 19mm

Spring Washer 1/4'' x 13mm

10PCS

1PC

HARDWARE LISTS

SKETCH

Short bolt 1/4" x 40mm

2PCS

Long bolt 1/4" x 75mm 4PCS

Medium bolt 1/4" x 60mm

4PCS

2PCS

ASSEMBLY INSTRUCTIONS

SIDE CHAIR - 2PK

MADE IN VIETNAM

PAGE: 1 OF 2

Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed

staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in packing.

1. We recommend that you should assemble this product with the assistance of another person;

this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.

2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.

3. please do not over tighten screws or bolts.

4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly

purchased product correctly and efficiently.

Summary of content (8 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS SIDE CHAIR - 2PK Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in packing. 1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly. 2.
PAGE 2
STEP.2 Attach the seat frame to the chair back using long STEP.1 Attach the seat cushion with frame to chair back bolt (C), spring washers (D), flat washers (E), and allen key (F). using short bolt (A), spring washers (D), flat washers (E), and allen key (F). E D A E D C (1) F F (2) STEP.3 Attach the front legs to the seat frame and using medium bolts(B), spring washers (D), flat washers (E), and allen key (F).
PAGE 3
ASSEMBLY INSTRUCTIONS DINING TABLE Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in packing. 1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly. 2.
PAGE 4
STEP.1 Attach the legs to table top using short bolt (A), STEP.2 Unlock the hinges on both sides then open the table, spring washers (B), flat washers (C), and ellen key (D). put the extension leaf to the table top. (2) C B (3) A D (1) STEP.3 Slowly close the table top lock the hinges on both sides.
PAGE 5
ASSEMBLY INSTRUCTIONS DINING TABLE ROUND Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in packing. 1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly. 2.
PAGE 6
STEP.1 Attach Support rail to Pedestal and using long bolts STEP.2 Attach Support rail to the table top and using long bolts (A), spring washers (C), flat washers (D), and allen key (E). (A), spring washers (C), flat washers (D), and allen key (E). E E A A C D C D (2) (1) (3) STEP.3 Attach base panel to Pedestal and using short bolts (B), spring washers (C), flat washers (D), and allen key (E). Attach foot to base panel by rotating it from left to right.
PAGE 7
ASSEMBLY INSTRUCTIONS BUFFET/ HUTCH Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in packing. 1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly. 2.
PAGE 8
ASSEMBLY INSTRUCTIONS BUFFET/ HUTCH STEP 2 Attach Hutch to the Buffet and using screw(B), Mending plate (A). (1) B (2) A STEP 3 Move Buffet into final position and use tipping restraint to attach to the wall.