Installation & Assembly

STEP 2
Slide N5 into the grooves in N3
and N4. Push N5 all the way
forward so it meets N1. (see
Figure 2)
Assembly Instruction 5 / 5
Drawer (N)
Part List
N2.
Back Part
2 pcs.
N3.
Side Part
2 pcs.
N4.
Side Part
2 pcs.
N5.
Base Part
2 pcs.
N1.
Front Part
2 pcs.
N5
N3
N4
N2
STEP 1
Attach N1 to N3 and N4, using
a Phillips screwdriver and
long wood screws (4X), tighten
halfway.
Attach N2 to N3 and N4 using
long wood screws (4X), tighten
halfway. (see Figure 1)
STEP 3
Insert short wood screws (6X)
into the pre-drilled holes in N5
and tighten. (see Figure 3)
STEP 4
Assemble Pull Handle
with machine screws.
(see Figure 4)
Tighten all screws used in drawer assembly.
MAKE SURE ROLLER
IS ON THE BACK
N2
N3
N4
N1
N1
N5
N3
N1
Figure 1
Figure 2
Figure 4
Figure 3
N2
Figure
4
N1.
N5.
N4