9200-1042 AI

ManualsBrandsAugust Grove ManualsFurnitureRegiene Kitchen Island with Stainless Steel Top

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Tools required for assembly : Phillips screwdriver

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Pipe

3 pcs.

Hex Wrench

1 pc.

Caster

Two with lock and

Two non-locking

4 pcs.

M3.5x25

Wood Screw (long)

16 pcs. (+1 extra)

Pull Handle

6 pcs.

88 9200 001C

Kitchen Cart

M4x25

Machine Screw

12 pcs.

(Please refer to the last page(s) of these

instructions for drawer assembly.)

Back Panel

1 pc.

M6x20

Head Cap Bolt

(short) for Top

4 pcs. (+1 extra)

Adjustable Pin

12 pcs. (+1 extra)

Small

Hex Wrench

1 pc.

ck Pan

M4x16

Wood Screw

for Caster

16 pcs. (+1 extra)

Middle Panel

2 pcs.

Side Panel

1 pc.

Back Panel

2 pcs.

Side Panel

1 pc.

Back Piece

2 pcs.

Back Stretcher

1 pc.

Front Piece

1 pc.

Base

1 pc.

Door

2 pcs.

Door

2 pcs.

Drawer Divider

1 pc.

Drawer

2 pcs.

Shelf

2 pcs.

Side Rack

1 pc.

M3.5x12

Wood Screw (short)

12 pcs. (+1 extra)

Shelf

1 pc.

Side Rack

1 pc.

Base Rack

1 pc.

Wood Plug

9 pcs. (+1 extra)

Spring

Flat Washer

4 pcs. (+1 extra)

M6x25

Head Cap Bolt (short)

for Towel Bar

13 pcs. (+1 extra)

Towel Bar

1 pc.

Steel Plate

Connector for Top

4 pcs.

Flat Washer

4 pcs. (+1 extra)

Head Cap Bolt

13 pcs. (+1 extra)

Summary of content (5 pages)

PAGE 1
88 9200 001C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List D. Side Panel 1 pc. C. Middle Panel 2 pcs. B. Side Panel 1 pc. E. Back Panel 2 pcs. I. Front Piece 1 pc. H.
PAGE 2
Assembly Instruction 2 / 5 IMPORTANT * Do not tighten up all the screws and bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Wood Screw for Casters Attach 4X Casters to Base (J) with Wood Screws for Caster, with the Locking Casters at the front as indicated by ‘Arrow’ sticker.
PAGE 3
Assembly Instruction 3 / 5 M STEP 4 Attach Side Panel (B) and Divider (M) to the unit with Head Cap Bolts. B Head Cap Bolt STEP 5 Head Cap Bolt Attach Side Rack (Q) to the unit with Head Cap Bolt. Slide Base Rack (S) and Pipes into Side Rack (R). Attach Side Rack (R) to unit with Head Cap Bolt. S Q R Head Cap Bolt (short) for Towel Bar STEP 6 Attach Towel Bar to the unit with Head Cap Bolts (short) for Towel Bar.
PAGE 4
Assembly Instruction 4 / 5 STEP 7 Adjustable Pin Insert Adjustable Pins into side panels and middle panels at the desired level and slide Shelves (O) and (P) into place. N Assemble Pull Handles to Doors (K) and (L) with Machine Screws. (see Figure 3) Attach Doors (K) and (L) by inserting the lower Spring Pin into the hole until it clicks (see ﬁgure 4) and then do the same for the upper Spring Pin. Slide Drawers (N) into place.
PAGE 5
Assembly Instruction 5 / 5 Drawer (N) N3 Figure 1 STEP 1 N1 N2 N4 MAKE SURE ROLLER IS ON THE BACK N3 Attach N1 to N3 and N4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. N5 N4 Figure 2 Attach N2 to N3 and N4 using long wood screws (4X), tighten halfway. (see Figure 1) N2 STEP 2 Slide N5 into the grooves in N3 and N4. Push N5 all the way forward so it meets N1.