ASSEMBLY INSTRUCTIONS Description : X-BACK CHAIR Printed in Vietnam -1-
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt 1 2 (M6x40mm) Sketch 4 (M6x60mm) Long bolt Screw 4 4 (M6x80mm) 10 (M4x35mm) Flat washer 5 Qty Medium bolt 3 3 Description Lock washer 11 6 (6.5x19mm) 11 (6.
STEP 2 Attach front legs (D) to the seat frame with bolts (2), washers (5) and (6) .Tighten with Allen key (7). Attach front stretcher (F) between front legs and side stretchers (E) to front and back legs with screws (4). Tighten with a screwdriver. STEP 3 Attach the seat (C) to top of the seat frame (from Step 2) with screws (4). Tighten with the screw driver.
