Assembly Instructions

Thank you for purchasing this quality product.Be sure to check all packaging material

carefully for small parts that may have come loose inside the carton during shipment.

COMPONENT LIST: HARDWARE LIST:

Flat Washer

Allen Key

Lock Washer

1 pce

JCBC Bolt(Short)

JCBC Bolt(Long)

2 pcs

8 pcs

10 pcs

PART NO

FIGURE

DESCRIPTION

QTY

Hardware Bag

1 pce

2 pcs

PART NO

FIGURE

DESCRIPTION

QTY

This product will take 15-20

minutes to assemble.

Reminders

1.Use only the hardware supplied.

2.Once the product is assemble,level and tighten all the bolts.

3.Do not over-tighten bolts.

4.This item may require periodic tightening

NOTE:

1.Two or two people are needed for assembly

2 please keep all hardware parts out of the reach of children.

Wood Seat

Chair Back

Front Legs

Page 1 of 2 MADE IN MALAYSIA

PAGE 1
Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment.
PAGE 2
ASSEMBLY : STEP 1 Step1: Attached wood seat to the chair back using the provided hardware as shown on Fig.1.1 and Fig.1.2. Step2: Attached front legs (Left and Right) to wood seat using the provided hardware as shown in Fig.2. Allen Key JCBC Bolt (Long) Lock Washer Flat Washer (Fig.1.1) (Fig.1.2) Allen Key JCBC Bolt (Short) Lock Washer Flat Washer STEP 2 (Fig.2) Flat Washer Lock Washer JCBC Bolt (Long) Allen Key STEP 3 3.1- Turn the chair to standing position. 3.