Installation & Assembly

Assembly Instructions
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
STEP 2
STEP 3
D
E
C
Attach the Seat (A) to the assembled unit
with Head Cap Bolts (short).
Put the Base (F) into the storage.
B
E
Insert Cross Dowels into the
holes of Front Panel (D) and
Back Panel (E).
Attach the Side Panel (B) and (C)
to the Front Panel and Back Panel
with Head Cap Bolts.
Cross Dowel
Assembly
A
Turn over the Seat (A).
Attach Spring Support to the
Seat (A) with Wood Screws.
Spring Support Assembly
A
F
STEP 4
Cover all holes with
Wood Plugs
Cross Dowel
Cross Dowel
Head Cap Bolt
(long)
Head Cap Bolt
(long)
Head Cap Bolt
(short)
Wood Screw